Fluke 773 Milliamp Process Clamp MeterBest in class 0.2 % accuracy0.01 mA resolution and sensitivityMeasure 4 to 20 mA signals without �breaking the loop�Measure mA signals for PLC and control system analog I/ODual backlit display with both mA measurement and percent of 4 to 20 mA spanMeasurement Spotlight illuminates hard to see wires in dark enclosuresDetachable clamp with extension cable for measurements in tight locationsMeasure 10 to 50 mA signals in older control systems using the 99.9 mA rangeAutomatically change the 4 to 20 mA output for remote testingPower saving features, auto-off, backlight timeout extend battery lifeHold function captures and displays changing measurementsMeasure 4 to 20 mA signals with in-circuit measurementSimultaneous mA in-circuit measurement with 24V loop power for powering and testing transmittersSource 4 to 20 mA signals for testing control system I/O or I/PsmA output linear ramp or 25% step outputAutomatically change the 4 to 20 mA output for remote testingDC voltage measurement to verify 24V power supplies or voltage I/O signalsSource DC voltage to test input devices that accept a 1-5V or 0 to 10V signalsScaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clampEnables milliamp signal logging to a separate logging device without breaking the loopOutput mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loopmA in/out: simultaneously measure the mA signal with the clamp and source a mA signalApply a mA input signal to a device and measure its� 4-20 mA output on devices such as valves or mA isolatorsVoltage output linear ramp or 25% step outputAutomatically change the voltage output for remote testingIncluded accessories:Four AA alkaline batteries (installed)Soft carrying caseTL75 test leadsAC 72 detachable clipTL 940 mini hook test leadsInstruction sheetHanging tool with hook and loop strap